FireAngel FixPad 7,2 cm

Fixpad 7.2 cm for First Alert smoke detector series 700

€2,00
Skip to product information
FireAngel FixPad 7,2 cm

Fixpad 7.2 cm for First Alert smoke detector series 700

€2,00
Taxes included.

Fixpad 7.2 cm diameter especially for First Alert smoke detectors of the 700 series

Are you looking for a quick and easy way to mount First Alert smoke detectors?
Buy the Fixpad with a diameter of 7.2 cm for easy and clean installation, especially for First Alert smoke detectors of the 700 series, at a reasonable price here. This FixPad consists of an adhesive foam film coated on both sides, especially for the installation of smoke detectors, carbon monoxide detectors, etc.

Only at room temperature is the FixPad glued with one side to the (clean, possibly cleaned) mounting plate of the smoke alarm.
Then peel off the film from the second side and stick the smoke detector mounting plate onto the ceiling in the previously cleaned mounting area. After sticking the mounting plate on, press it firmly and hold it down for at least a minute. This is the only way to create a firm connection with the ceiling. Then insert the smoke detector into the mounting plate.

Attention: The flexible structure of the FixPad can compensate for slight unevenness in the surface. However, the surface should have the following properties: even, free of dirt, dust, oil, grease and
load-bearing. For example, when attaching the adhesive pad - Fixpad to a ceiling with loose paint, it can be difficult. If this is not guaranteed, a permanent and secure connection cannot be achieved. If the surface is not suitable, fastening with screws is recommended.


Advantages:
- No drilling, no noise
- Saves time
- Clean, residue-free attachment

- Extremely cost-effective


Technical data:
Material: Coated polyethylene foam
Lower processing temperature: 10 C
Maximum usage temperature: 40 C

Geprüfte Qualität

Schneller Versand

Beratung & Support

Systemlösungen

Montage

Alle unsere Produktpreise beziehen sich ausschließlich auf die Hardware. Die Montageleistungen (wie Anbringung, Konfiguration und die finale Inbetriebnahme des Systems durch Fachpersonal) sind im Preis nicht inbegriffen und werden bei Bedarf separat nach Aufwand verrechnet.

Wenn Sie eine Montage benötigen, kontaktieren Sie uns bitte über das Formular auf der Kontaktseite. Geben Sie dabei möglichst genaue Details zu Ihrem Objekt an, zum Beispiel ob es sich um ein Haus, eine Wohnung, ein Büro oder ein anderes Objekt handelt, sowie welche Bereiche oder Komponenten konkret gesichert werden sollen.

Versand & Rückgabe

Wir bemühen uns, alle Bestellungen zeitnah zu bearbeiten und zu versenden, und arbeiten fleißig daran, dass Ihre Artikel so schnell wie möglich zu Ihnen gelangen. Wir sind bestrebt, allen unseren Kunden ein positives Einkaufserlebnis zu bieten.

Wenn Sie aus irgendeinem Grund einen Artikel zurückgeben möchten, wenden Sie sich bitte an unser Team, das Ihnen gerne weiterhilft. Wir prüfen jede Rücksendung sorgfältig und mit Bedacht.

Das könnte Ihnen auch gefallen: